You are here:

Dynamic monitors

The IVM6000-LP ensures reliable designs and peace of mind by confirming even distribution to all zones, as well as providing early detection and immediate alert of valve malfunctions. Distributing valve + Intelligent Valve Monitor combination offers superior reliability and control system simplicity compared to using solenoid or motor-actuated valves for zoning effluent distribution systems. It is less costly than using larger pumps or many additional pumps, which increases control panel complexity.

Our Dynamic Monitors are supplied by our partners:

http://dynamicmonitors.com/

Benefit statement

close expand

100% detection of uneven distribution

  • Debris inside valve
  • Broken stem spring
  • Inadequate flow to seat disk
  • Faulty installation
  • Flow interruptions, air pockets
  • Pump/control panel problems
  • Wrong cam or broken cam
  • Siphoning through valve
  • Back pressure on valve
  • Freezing of valve or piping

How it works

close expand

Easy to install & retrofit:

  • 10 minute install or retrofit over valve
  • No modifications to inlet or outlet piping
  • No extra sensors required

Simply replace the valve’s original rubber disk and stem assembly with the sensor enabled one supplied with the IVM6000. Slide the monitor down over the valve and supply low voltage line power. Connect the dry contact alarm output to any standard third party pump control panel and the IVM6000TM-LP is ready to provide immediate notification of any valve malfunctions.

Untitled-1

Schematics and documentation:

close expand
Product Specification
Valve/Cam Model: All 6000 series. 2, 3, 4, 5 or 6 outlets
Line power: Any from 6V ~ 30V AC or DC. Use standard 24V AC (40VA) transformer
Power consumption: <50mA @ 24V AC, <1.2Watts max
Alarm output: Relay contact ratings 1A/30V DC max, 0.5A/125V AC max.
Event Storage:Records all events with 255+ repeat counts on each entry.
Dimensions: 9.5” x 8.5” x 7.5” (high) (240mm x 216mm x 191mm)
Shipping Dimensions:10” x 10” x 10” box
Cable: 24 AWG 4/8 Conductor, Direct bury 10 ft (3.0m) standard
Weight:approx. 2 lbs 15 oz (1325g)
Materials: Case ABS, Lens: Polycarbonate
Measurement resolution:1 second
Operating Temperature: -20°C to 50°C (-4°F to 122°F)
Storage Temperature: -40°C to 80°C (-40°F to 176°F)

Brochure

close expand

Download brochure Dynamic Monitor Overview Brochure (PDF)

Download brochure Dynamic Monitor Technical Specification (PDF)

Testimonial

close expand

“The monitors provide peace of mind that the valves are distributing effluent uniformly, and have significantly reduced the amount of time I spend making random spot checks. Your IVMs are one of the most useful, time saving devices I have seen in a very long time, maybe ever!”

Art Betker, Class C WWT Operator

Rice, Minnesota

To find out more, or to purchase our products and services, contact Anua today